Belmed F400 Dental Flowmeter PC-7 With Telescoping Arm + Scavenger
The Belmed PC-7 Flowmeter system with stationary arm and scavenger components can be used as both an oxygen flowmeter and nitrous oxide flowmeter. The flowmeter system comes complete with the flowmeter head, scavenger inhaler, tube, bag, and stationary wall arm.
WARNING: This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
- Additional information
Flowmeter System with Telescoping Arm
Flowmeter Head Dimensions – 8.75″H X 3.75″W X 10.25″D
Weight of Flowmeter Head – 5 LBS
Bag and Outlet Diameter – 22MM (APPROX. 7/8″)
Oxygen Flow Range – 3-10 LPM
Nitrous Oxide Flow Range – 0-7 LPM
Fail-Safe Type – Proportional
Legal Disclaimer: The Belmed PC-7 and PC-7C dental flowmeters shall only be used by dentists, physicians, or other practitioners that are qualified and licensed to use nitrous oxide sedation. The Belmed PC-7 and PC-7C dental flowmeters shall be used in conjunction with a scavenging/vacuum system to remove any free floating nitrous oxide (N2O) gas from the ambient environment, as the CDC has reported that exposure to free-floating nitrous oxide gas can have adverse health effects such as dizziness, coughing, shortness of breath, unconsciousness, and infertility.
MGI Inc. (authorized dealer) and Belmed Inc. (manufacturer) shall not be liable for any damage, injury or loss arising out of the use of the product, whether as a result of a defect in the product or otherwise, if prior to such damage, injury or loss, the product was (1) damaged, misused, or misapplied; (2) repaired, altered or modified by persons other than Belmed, Inc. (3) not installed in strict compliance with applicable codes and ordinances; or (4) not installed by Belmed, Inc. or an authorized Belmed, Inc. dealer.
|Nitrous Oxide Flow Range|